Setting time & day, Programmable settings time and day – Panasonic Acr14CF.tmp User Manual

Page 19

Advertising
background image

Pr
epar

ation

For assistance, please call: 1-800-211-PANA(7262)

13

Programmable Settings

Time and Day

We recommend you set the time and day so that the unit will announce the
day and time each message was recorded when you play back messages.

• When entering the time in step 3, you cannot enter numbers greater than

12. Do not use military time. (To set 13:00 hours, enter “0100”, then
select PM in step 4.)

To confirm the time and day, press [VOICE ENHANCER] then [0].

• The current day and time are announced. When finished, press [OFF].

1

Press [VOICE ENHANCER].

• The indicator flashes.

2

Press [0].

• “Set time” is announced. If previously

set, the day and time will be announced.

3

Enter 4 digits for the time (hour and
minute). (Ex. To set 9:30, enter “0930”.)

4

Set the AM or PM by pressing [*].
• Each time you press [*], “AM” or “PM”

will be announced.

5

Set the day by pressing [#].
• Each time you press [#], the selected

day will be announced.

6

Press [VOICE ENHANCER].

• The unit announces the day and time,

the clock is set and “

E” disappears from

the base unit display.

• The handset beeps and the indicator

light goes out.

• If the handset beeps 3 times, the time

was not set correctly. Start again from
step 1.

The time and day may be incorrect after a power failure. When “

E”

flashes on the display, set the time and day again.

Handset

[OFF]

[VOICE ENHANCER]
and Indicator

Advertising