Panasonic Acr14CF.tmp - Manual (Page 33)

Answering System
For assistance, please call: 1-800-211-PANA(7262)
27
Erasing Messages
The unit will announce the remaining recording time after playback if it is
less than 3 minutes.
New messages cannot be recorded when:
—“Memory full” is heard.
—“
” flashes on the base unit.
—the ANSWER ON indicator flashes rapidly (when the Answering System
is on).
Erase unnecessary messages. We recommend you erase unnecessary
messages after each playback.
Erasing a specific message
Press [ERASE] while the message you want
to erase is being played.
• The unit beeps, then plays back the next
message. To exit playback mode, press
[STOP] twice.
Erasing all messages
All recorded messages, except the greeting
message, can be erased at one time.
1 Press [ERASE] while the base unit is not
being used.
• “To erase all messages, press ERASE again” is
heard.
2 Within 10 seconds, press [ERASE] again.
• The unit beeps, then announces “No
messages”.
• The base unit display shows “0”.
Base Unit
FULL
[ERASE]
ANSWER ON Indicator
[STOP]