Pioneer PDR-609 - Manual (Page 21)

21
En
4 Getting started
English
SYNC–1
SYNC-1
SYNC–ALL
SYNC
SYNC–FINAL
SYNC
CD-R
CD-R
CD-R
O1 O1 OO:OO
FINALIZE
CD-R
1-track sync
All-track sync
All-track sync w/ finalization
Record-pause (no sync)
Automatically
recording and
finalizing a disc
This is a variation on all-track synchro
recording on the previous page. After all
tracks on the source material have been
recorded, the recorder automatically
finalizes the disc.
You can also copy CD text digitally as long
as: it has not been copy-protected by the
manufacturer; the disc you want to copy is
not in program-play mode; you use a
completely blank CD-R.
1 Load a CD-R or CD-RW disc.
Check the display to make sure that there's
enough space on the disc for what you
want to record.
2 Press INPUT SELECTOR to
choose an input.
Pressing
INPUT SELECTOR repeatedly
switches the active input:
Analog - Optical - Coaxial
The display indicates the current input.
3 Make sure that the source is not
playing, then press SYNCHRO
three times.
Press
SYNCHRO repeatedly to change the
recording mode:
Synchro recording won't work if the source
is already playing!
The recorder goes into all-sync record
pause and the
SYNC and FINALIZE
indicators start to blink.
DIGITAL REC LEVEL ANALOG REC LEVEL
MENU/ DELETE TEXT
SYNCHRO
PUSH ENTER
R L ANALOG REC BALANCE
Legato Link Conversion CD TEXT
1
3
◊ÛB->?/
MONITOR
INPUT SELECTOR AUTO MANUAL
AUTO MANUAL
TRACK NO. WRITE
TIME
FINALIZE ERASE
SCROLL
2
SYNC–FINAL
SYNC
CD-R
FINALIZE
The display shows all-track sync with
finalization, with the
SYNC and
FINALIZE indicators blinking to show that
recording can start.
Note: If You want to record CD text
information as well, press
NAME after
pressing SYNCHRO . The CD TEXT
indicator will light.
4 Play the source.
Recording starts automatically.
If you press
SYNCHRO during recording,
the recorder will finish recording without
finalizing the CD-R.
5 After recording all tracks on the
source, the recorder starts
finalizing the disc.
After the recorder encounters about five
seconds of continuous silence, it assumes
the end of the source has been reached and
goes into all-sync record-pause.
Be careful: If the recorder detects
another signal or start ID (DAT or DCC) it
will start recording again!
If the recorder detects no signal for one
minute, finalization starts (no more
recording is possible after this so make
sure that there aren’t any spaces of more
than one minute during the source you’re
recording).
See Automatically number-
ing tracks on page 33 to set the silence
threshold.
Finalization takes about two minutes,
during which time none of the buttons are
operative.
Never turn the power off during finaliza-
tion!
• If a digital signal is interrupted, the
recorder continues recording. However,
if no signal has been detected within
five seconds, the recorder pauses
recording and will not finalize the
disc—see Digital signal interruptions
on page 18.
• If the recorder reaches the end of the
disc, the recorder begins finalization.
Note: If you find that synchro recording
does not seem to work, see the trouble-
shooting section on pages 40–42 for
possible remedies.
ENTER
CURSOR
MENU/
DELETE NAME MARK
SET CLEAR
DISPLAY
/CHARA
7
1 ¡
8
3
4 ¢
A B C D E F
G H I M N O J K L
P Q R S T U V W X Y Z
REC SYNCHRO
REPEAT RANDOM NAME CLIP
INPUT
SELECTER
FADER
SKIP PLAY SKIP ID
PROGRAM CHECK CLEAR
AUTO/
MANUAL
1 2 3
4 5 6
7 8 9
10/0 >10
SCROLL
TIME
О
•
2
3