Pioneer PDR-609 - Manual (Page 38)

38
En
6 More recording features
When a finalized disc is
loaded
Be careful: When you erase the TOC,
the CD text information for the disc is also
copied to memory for editing purposes,
erasing the oldest text information stored
(as explained on page 30).
1 Press ERASE.
The display shows
ERASE TOC? .
Press
7 to cancel erase here.
2 Use the jog dial or
4 and ¢
buttons on the remote control
to change the erase option.
Switch between:
ERASE TOC? – erase the table of contents
(returns disc to a non-finalized state)
ERASE ALL? – erase all tracks
3 Press
8 (6 on the front
panel) to start erasing.
The function indicator lights and the
display shows
ERASE , and the time
remaining to completion.
You can halt this erase process by holding
down the
7 button for 10 seconds.
4 Eject the disc.
You must eject, then re-insert the disc if
you want to record any new tracks.
Reinitializing a disc
1 Press and hold ERASE for about
four seconds.
The recorder prompts you to confirm with
the message
INITIALIZE? .
Press
7 to cancel all disc erase here.
2 Press
8 (6 on the front
panel) to start erasing.
The process takes about 40 minutes,
depending on the disc. During this time,
the display shows
ERASE , followed by the
remaining time to completion.
You can halt this erase process by holding
down the
7 button for 10 seconds.
3 Eject the disc.
You must eject, then re-insert the disc if
you want to record any new tracks.
◊ÛB->?/
MONITOR
INPUT SELECTOR AUTO MANUAL
AUTO MANUAL
TRACK NO. WRITE
TIME
FINALIZE ERASE
SCROLL
1
DIGITAL REC LEVEL ANALOG REC LEVEL
MENU/ DELETE TEXT
SYNCHRO
PUSH ENTER
R L ANALOG REC BALANCE
Legato Link Conversion CD TEXT
2
◊ÛB->?/
MONITOR
INPUT SELECTOR AUTO MANUAL
AUTO MANUAL
TRACK NO. WRITE
TIME
FINALIZE ERASE
SCROLL
1
DIGITAL REC LEVEL ANALOG REC LEVEL
MENU/ DELETE TEXT
SYNCHRO
PUSH ENTER
R L ANALOG REC BALANCE
Legato Link Conversion CD TEXT
2
3