Panasonic AG-DVC80 - Manual (Page 16)

16
Parts and their functions
e OPEN button
Press the OPEN button in the direction of the
arrow to open the LCD monitor f.
When the LCD monitor is opened, the image
on the viewfinder switches to the LCD
monitor. j SPEED SEL button
After having pressed the SHUTTER button
i
, press this button to select the shutter
speed. (See page 29)
k CH1 SELECT switch
This switch is used to select the input signals
which are to be recorded on the audio
channel 1 track.
INT (L):
Audio signals of the left (L) channel of the
internal microphone
INPUT1:
Audio signals which are input to the INPUT
1 connector
INPUT2:
Audio signals which are input to the INPUT
2 connector
l CH2 SELECT switch
This switch is used to select the input signals
which are to be recorded on the audio
channel 2 track.
INT (R):
Audio signals of the right (R) channel of the
internal microphone
INPUT2:
Audio signals which are input to the INPUT
2 connector
m INPUT 1 switch (MIC POWER +48 V)
When this switch is set to ON, +48 V power
(power supply for the phantom mic) is
supplied to the INPUT 1 connector.
n INPUT 2 switch (MIC POWER +48 V)
When this switch is set to ON, +48 V power
(power supply for the phantom mic) is
supplied to the INPUT 2 connector.
f LCD monitor
g Internal speaker
h RESET button
If the camera recorder cannot be operated
even though its power is on or some other
form of trouble has occurred, use a pointed
object to press the RESET button. This will
reset the system microcomputer.
Even after resetting has been initiated, the
entered setting menu values and memory
contents will not be erased.
Refrain from pressing the RESET button
when the camera recorder is operating
properly.
i SHUTTER button
Press this button to change the shutter
speed.
After pressing this button, press the SPEED
SEL button j to select the shutter speed.
(See page 29)
f e
l n
m k
j
i
h
g
OPEN