Mounting the battery, Supplying power from the ac adapter – Panasonic AG-DVC80 User Manual

Page 22

Advertising
background image

CAUTION:

This unit will operate on 110/120/220/240V AC. An
AC plug adapter may be required for voltages other
than 120V AC.
If a conversion plug is required, consult with your
dealer as to which one is to be purchased.

22

Mounting the battery

1

Raise the viewfinder.

2

Push the battery straight in, and slide it
downward until it clicks into position.

3

Return the viewfinder to its original
position.

5

Return the viewfinder to its original
position.

Supplying power from the AC adapter

1

Raise the viewfinder.

2

Push the battery-type connector on the
DC cable straight in, and slide it
downward until it clicks into position.

3

Connect the DC cable to the AC adapter.

4

Connect the AC cable to the power outlet.

Removing the battery
While pressing the battery eject button, slide
the battery upward to remove.

O

Set the POWER switch to OFF, and check
that the CAMERA/VCR lamp has gone off
before removing the battery.

O

Support the battery with your hand to
ensure that it will not drop.

1

2

3

Battery eject button

1

3

4

2

Connect the AC adapter correctly as
shown in the figure.

O

The battery cannot be charged while
supplying power from the AC adapter to the
camera recorder.

Advertising
This manual is related to the following products: