Sw mode screen, Setting menus – Panasonic AG-DVC80 User Manual

Page 39

Advertising
background image

39

Setting menus

SW MODE screen

Item/

(display mode)

Description of settings

MID GAIN
(Camera)

For setting the gain value which is to be
allocated to the M position of the GAIN
switch.
0 dB, 3 dB, 6 dB

HIGH GAIN
(Camera)

For setting the gain value which is to be
allocated to the H position of the GAIN
switch.
6 dB, 9 dB, 12 dB

ATW
(Camera)

For setting the ATW (Auto Tracking White)
function which is to be allocated to the
WHITE BAL switch.
OFF:

The ATW function is not activated.
However, if it has been set in the AUTO
button or USER button, it will follow the
operation of the button concerned.

Ach:

The ATW function is activated when the
WHITE BAL switch has been set to the A
position.

Bch:

The ATW function is activated when the
WHITE BAL switch has been set to the B
position.

PRE:

The ATW function is activated when the
WHITE BAL switch has been set to the
PRST position.

HANDLE ZOOM
(Camera)

For setting the zoom speeds which are to
be allocated to the positions of the
HANDLE ZOOM switch.
L/OFF/H:

LOW/OFF/HIGH are set to the 1/2/3
positions. (At OFF, no zoom operations
are performed.)

L/M/H:

LOW/MID/HIGH are set to the 1/2/3
positions.

The underlining indicates the factory setting.

Item/

(display mode)

Description of settings

USER1
(Camera)

For setting the operation of the function
allocated to the USER1 button.
COLOR BAR:

The color bar display is set to ON or
OFF.

SPOTLIGHT:

The auto iris control for the spotlight is
set to ON or OFF.

BACKLIGHT:

The auto iris control for backlight
compensation is set to ON or OFF.

BLACKFADE:

When the button is held down, the whole
image is faded out into black. The
sound is also faded out at the same
time.

WHITEFADE:

When the button is held down, the whole
image is faded out into white. The
sound is also faded out at the same
time.

MODECHECK:

When the button is pressed, the camera
status currently set is displayed in the
viewfinder and on the LCD monitor
where it can be checked.

ATW:

The operation of the ATW function is set
to ON or OFF.

ATWLOCK:

When the button is pressed, the white
balance value is fixed; when it is pressed
again, the operation of the ATW function
is performed.

GAIN:18 dB:

When this button is pressed, the gain is
set to 18 dB.

O

The picture may be temporarily
disturbed when the gain has been
switched to 18 dB or from 18 dB to
another value.

USER2
(Camera)

For setting the operation of the function to
be allocated to the USER2 button.
The settings are the same as for the ones
for the USER1 items.
BACKLIGHT

Advertising
This manual is related to the following products: