Panasonic AJ-D92P - Manual (Page 16)

16
3. Power supply and other sections
Parts and Their Functions
1 REMOTE connector (9-pin)
When the dedicated external remote controller (AJ-
A95: optional accessory) is connected to this
connector, the unit can be operated from this
external controller.
<Note>
This connector conforms to the RS-422A interface
standard but it does not support any editing
commands.
This unit does not have a phase-synchronizing
function so that when it is used as a simple source
VTR for editing applications, the phase
synchronization of the source VTR (player) should
be set to OFF for use.
2 DC OUT socket
This is the DC 12V output socket.
It supplies power to the dedicated external remote
controller (AJ-A95). The DC power cable is
included with the AJ-A95.
3 DC IN socket
This is the DC 12V input socket.
Use the AC adapter (AJ-B75) available as an
optional accessory.
4 BREAKER button
This shuts off the power when a problem has
occurred.
As soon as the power is shut off, the BREAKER
button pops out.
After checking the power connections, equipment
connections and battery, push the BREAKER
button back in. Power will be supplied if the
problem no longer exists.
If the power fails to be supplied even after the
BREAKER button has been pushed back in, consult
your dealer.
5 Battery compartment
The dedicated battery pack (AU-BP402: optional
accessory) is installed inside the compartment.
HEADPHONES
EARPHONE
VIDEO IN
REMOTE DC OUT
... 12V 200mA
SUPER IMPOSE
OFF ON
PHONE
LEVEL
PHONE
SELECT
TC IN OUT VIDEO
OUT
VIDEO
OUT 1 2
AUDIO
OUT
CH1·2
CH1
BREAKER
DC IN
A
U
D I
O
I
N
A
U
D I
O
O
U
T
CAMERA
DC ... 12V 3A
COMPO- NENT
MIC POWER
OFF
CAM LINE
-60 +4dB
ON CH2
MIC POWER
OFF
CAM LINE
-60 +4dB
ON CH3
MIC POWER
OFF
CAM LINE
-60 +4dB
ON CH4
MIC POWER
OFF
CAM LINE
-60 +4dB
ON
COMPO- SITE
CH3·4
CH 1 CH 2 CH 3 CH 4
CH 1 CH 2 CH 3 CH 4 PUSH PUSH PUSH PUSH
BA
TTER
Y