Panasonic AJ-D92P - Manual (Page 40)

40
Setup (Initial Settings)
The unit’s main settings can be performed and
checked using the on-screen menus which are
displayed on the video monitor connected to the unit.
It is also possible to perform and check the settings
using the item numbers and setting numbers which
appear on the front panel’s display status area.
Two user setting memories are provided. The desired
settings can be stored in these memories in advance
for use during operation.
Setting method using on-screen
menus
Set the MENU switch to the ON position.
The unit is now set to the menu setting mode,
and the menu screen appears on the video
monitor.
1
Press the MENU-UP button or MENU-DOWN
button to move the cursor (
) to the menu
item whose setting is to be changed.
The page can be scrolled up or down by pressing
the MENU-UP button or MENU-DOWN button
while holding down the PAGE button.
4
Press the DATA+ button or DATA– button to
change the setting.
5
Set the MENU switch to the OFF position.
This completes the menu settings.
7
Press the SET button to enter the setting.
To change more than one item on the menu,
repeat steps
4
,
5
and
6
for each item.
<Note>
The setting can be canceled by pressing the
MODE button.
When other items are to be changed without the
setting having been entered, press the MODE
button and then proceed with steps
4
,
5
and
6
.
6
Press the MENU-UP button or MENU-DOWN
button to move the cursor (
) to the menu
whose settings are to be changed.
2
Press the MODE button to set each item in
turn.
To return to the menu screen, press the MODE
button while holding down the PAGE button.
3
In the menu setting mode, the REW, FF,
SEARCH, STOP, PLAY, REC and PAUSE/STILL
function buttons serve as the PAGE, MENU-
DOWN, MENU-UP, MODE, DATA–, DATA+ and
SET buttons, respectively.
SETUP–MENU MAIN
NO.000
000 BASIC
100 OPERATION
200 INTERFACE
400 TAPE PROTECT
500 TIME CODE
600 VIDEO
700 AUDIO
900 WARNING&ALARM
END