Panasonic AJ-D92P - Manual (Page 42)

42
How to load the user settings
Set the MENU switch to the SET position.
The unit is now set to the menu setting mode,
and the menu screen appears on the video
monitor.
1
Press the RESET button.
The unit is set to the default setting mode, and
the default setting screen appears on the video
monitor.
2
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the LOAD
position, and press the SET button.
The unit is set to the LOAD mode, and the load
screen appears on the video monitor.
3
SELECT MODE
0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
SET–UP MENU <LOAD>
NO
FACTORY
USER <1>
USER <2>
Press the MENU-UP button or MENU-DOWN
button to move the cursor to USER1 or
USER2, and press the SET button.
O
If this operation is performed with the cursor
moved to NO instead, no change is made to
the user settings saved in the memory, and
operation is returned to the menu screen.
4
Set the MENU switch to the OFF position.
This completes the menu settings.
5
Setup (Initial Settings)
Press the MENU-UP button or MENU-DOWN
button to move the cursor to USER1 or
USER2, and press the SET button.
O
If this operation is performed with the cursor
moved to NO instead, the settings are not
updated, and operation is returned to the menu
screen.
5
Set the MENU switch to the OFF position.
This completes the menu settings.
7
SET–UP MENU <SAVE>
NO
USER <1>
USER <2>
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the SAVE
position, and press the SET button.
The unit is set to the SAVE mode, and the save
screen appears on the video monitor.
4
SAVE OK?
NO
YES
The screen for checking the SAVE operation
appears. Press the MENU-UP button or
MENU-DOWN button to move the cursor to
the YES position, and press the SET button.
The settings are now saved in the memory.
6
How to set the user default
settings
Set the MENU switch to the ON position.
The unit is now set to the menu setting mode,
and the menu screen appears on the video
monitor.
1
Perform steps
2
through
6
of “Setting
method using on-screen menus” to change
the items to the desired settings.
(See page 40)
2
Press the RESET button.
The unit is set to the default setting mode, and
the default setting screen appears on the video
monitor.
3
SELECT MODE
0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT