Panasonic AJ-HD130DCP - Manual (Page 20)

20
Setup (Initial Settings)
The VTR’s main settings can be performed and
checked using the on-screen menus which are
displayed on the video monitor connected to the VTR.
They can also be performed and checked using the
item numbers and setting numbers which are
displayed on the VTR’s front panel display.
The VTR comes with a user setting memory so that
desired settings can be stored in the memory ahead
of time and recalled for use at any time.
How to perform settings using
the on-screen menu
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The VTR is set to the menu setting mode, and
the menu screen is displayed on the video
monitor.
1
Press the MENU-UP button or MENU-DOWN
button to move the cursor (
2 ) to the next
menu item to be changed.
Pages can be scrolled up or down by pressing
the MENU-UP button or MENU-DOWN button
while holding down the PAGE button.
4
Press the DATA– or DATA+ button to change
the setting.
5
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
This completes the menu settings.
7
Press the SET button to enter the setting.
To change multiple items, repeat steps 4 , 5 and
6
.
<Notes>
A setting can be canceled by pressing the MODE
button.
To change another item without entering the
setting, press the MODE button and then repeat
steps
4
,
5
and
6
.
6
Press the MENU-UP button or MENU-DOWN
button to move the cursor (
2 ) to the first
menu item to be changed.
2
Press the MODE button, and select the setting
for each item.
To return to the menu screen, press the MODE
button while holding down the PAGE button.
3
In the menu setting mode, the REW, STOP, FF,
SEARCH, PLAY, PAUSE/STILL and REC control
buttons function as the PAGE, MENU-DOWN,
MENU-UP, MODE, DATA–, DATA+ and SET
buttons, respectively.
SET–UP MENU MAIN
NO.00
2 00 SYSTEM
000 BASIC
100 OPERATION
200 INTERFACE
400 TAPE PROTECT
500 TIME CODE
600 VIDEO
700 AUDIO
A00 MENU
How to return to the factory
settings
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The VTR is set to the menu setting mode, and
the menu screen is displayed on the video
monitor.
1
Press the RESET button.
The VTR is set to the default setting mode, and
the default setting screen is displayed on the
video monitor.
2
SELECT MODE
2 0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT