Pioneer DC500 User Manual
Page 22
EN-22
Inserting and Removing an SD Memory Card (Optional Accessory)
The digital still camera comes with 10MB of internal memory, allowing you to store video clips, captured
images, or voice recording files in the digital still camera. However, you can also expand the memory capacity
by using an optional SD (Secure Digital) memory card so that you can store more files.
1. Always make sure the digital still camera is turned off before
inserting or removing a memory card.
2. Insert an SD memory card in the correct orientation as shown in
the illustration.
3. Close the battery/SD memory card cover.
To remove the SD memory card, make sure the camera is
turned off. Press lightly on the edge of the memory card and
it will eject.
Be sure to format an SD memory card with this digital still camera
before using it. Refer to section in the manual titled “Formatting an
SD Memory Card or Internal Memory” for further details.
To prevent valuable data from being accidentally erased from an SD
card, you can slide the write protect tab (on the side of the SD memory
card) to “LOCK”.
To save, edit, or erase data on an SD memory card, you must unlock
the card.
Recommend SanDisk, Toashiba and Panasonic SD cards only.