Panasonic FT-LB10NTU - Manual (Page 32)

32
Computer settings
■ TCP/IP settings
Windows XP/2000:
The screens show the example for Windows XP.
(1) Right-click [My Network Places] to open the Properties
window.
(2) Right-click [Panasonic Wireless LAN PC Card] to open
the Properties window.
(3) Select Internet Protocol (TCP/IP) and click
[Properties].
(4) Enter the same segment IP address as the IP address
set by the projector.
(5) Enter the same value as the subnet mask set by the
projector, set the gateway (only in infrastructure
mode), and then click [OK] to return to the previous
window.
(6) Click [OK].
The new settings can be used without rebooting.
Other Applications (Changing the Initial Settings)
(cont.)