Using the et-cdwl2u (optional wireless card), Channels that can be used, Using the et-cdwl2u – Panasonic FT-LB10NTU User Manual
Page 43: Optional wireless card)
43
■ Channels that can be used
The channels (frequency range) that can be used differ according to the country or
region where the wireless card is used. Refer to the table below.
Country or region
Japan
United States
ARIB
STD33
& T66
FCC part 15
22
23
1 - 13
1 - 11
2,412 MHz -
2,472 MHz
2,412 MHz -
2,462 MHz
Taiwan
Malaysia
England, Germany,
France, Italy,
Belgium, Austria,
Sweden, Norway,
Denmark,
Switzerland, Holland,
Finland, Portugal,
Greece, Thailand,
South Korea,
Australia,
New Zealand
Spain
Singapore
DGT
SIRIM
ETSI
300.328
ETSI
300.328
IDA
24
25
26
1 - 13
10, 11
10 - 13
2,412 MHz -
2,472 MHz
2,457 MHz -
2,462 MHz
2,457 MHz -
2,472 MHz
Standard
Last two digits
of the card product
number
Channels
used
Frequency band
(Center frequency)
Check the last two digits of the product number noted on
the card rear label in the position shown in the right figure
to determine the product region of the wireless card you
have purchased.
N5HBD0000023
Note:
Bringing a wireless card into a country other than the
designated country is prohibited, and may infringe upon the
wireless telegraphy laws of that country.
Using the ET-CDWL2U
(Optional wireless card)