Panasonic FT-LB10NTU - Manual (Page 6)

6
■ Channels that can be used
The channels (frequency range) that can be used differ according to the country or
region where the wireless card is used. Refer to the table below.
When using the ET-CDWL3U card (See page 43 for details on using the ET-CDWL2U card)
Country or region
Japan
United States
ARIB
STD33
& T66
FCC part 15
27
28
1 - 13
1 - 11
2,412 MHz -
2,472 MHz
2,412 MHz -
2,462 MHz
Taiwan
Malaysia
England, Germany,
France, Italy,
Belgium, Austria,
Sweden, Norway,
Denmark,
Switzerland, Holland,
Finland, Portugal,
Greece, Thailand,
South Korea,
Australia,
New Zealand
Spain
Singapore
DGT
SIRIM
ETSI
300.328
ETSI
300.328
IDA
29
31
30
1 - 13
10, 11
10 - 13
2,412 MHz -
2,472 MHz
2,457 MHz -
2,462 MHz
2,457 MHz -
2,472 MHz
Standard
Last two digits
of the card product
number
Channels
used
Frequency band
(Center frequency)
Check the last two digits of the product number noted on
the card rear label in the position shown in the right figure
to determine the product region of the wireless card you
have purchased.
N5HBD0000028
Note:
Bringing a wireless card into a country other than the
designated country is prohibited, and may infringe upon the
wireless telegraphy laws of that country.
Notes on Using the Wireless Card
(cont.)