Receiving documents, Reception modes – Panasonic UF-490 User Manual

Page 56

Advertising
background image

56

Receiving Documents

You can select one of the four modes as shown below.

NOTE

1. Depending on the model of the Telephone Answering Machine (TAM) that is connected, some

of the features may not be compatible with your fax machine operating in the TAM Interface
mode.

2. If you are using the "Distinctive Ring Service" provided by your local telephone company,

please note that the ring pattern for your fax number must match with the setting of Fax
Parameter No. 36 (RING PATTERN DETECT). (See page 34)
If the setting does not match with the ring pattern, your machine will not receive a document
automatically and the telephone will continue to ring.
Furthermore, if your TAM does not support the "Distinctive Ring Detector" service, it may not
function properly in TAM Interface.

Reception Modes

Conditions

Suggested Reception Mode

Settings

You normally receive
only voice calls.

Telephone Mode

(IN Mode)

You can answer the incoming call via an External
Telephone (Optional). If you receive a fax calling
signal, simply press

START

to receive manually.

(See page 57)

1. Fax Parameter No. 15 set to

1: Tel

2. Press the IN/OUT button to

turn the lamp OFF.

RCV MODE=TEL

You receive both voice
and fax calls.

Fax / Tel Auto Switching Mode

(IN Mode)

Unit will answer the incoming call then
distinguishes whether it is voice or fax call. If it is a
fax call, the unit will receive automatically. If it is a
voice call, the unit will signal (ring) through the
speaker for your attention.

(See page 58)

1. Fax Parameter No. 15 set to

2: Fax / Tel SW.

2. Press the IN/OUT button to

turn the lamp OFF.

RCV MODE=FAX/TEL

You normally receive
fax calls only.

Fax Mode

(OUT Mode)

Unit will receive the document(s) automatically. All
incoming calls (including a voice call) are
answered by the fax machine.

(See page 59)

1. Fax Parameter No. 16 set to

1: Fax

2. Press the IN/OUT button to

turn the lamp ON.

RCV MODE=FAX

You receive both voice
and fax calls and a
Telephone Answering
Machine (TAM) is
connected.

TAM Interface Mode

(OUT Mode)

The TAM answers the incoming call. During that
time, the unit also monitors whether it is a voice
call, the TAM continues to operate. If it is a fax call,
the unit will automatically switch the line to the Fax
and begin receiving the document(s).

(See page 60)

1. Fax Parameter No. 16 set to

2: TAM / Fax

2. Press the IN/OUT button to

turn the lamp ON.

RCV MODE=TAM/FAX

Advertising