Pioneer PRO-950HD - Manual (Page 53)

53
En
Adjustments and Settings 11
Chapter 11
Adjustments and Settings
AV Selection
Select from the seven viewing options, depending on the current
environment (e.g., room brightness), the type of the current TV
program, or the type of images input from external equipment.
1 Press AV SELECTION.
• The current AV Selection mode appears.
2 Press AV SELECTION again before the displayed mode
disappears.
• For AV source, the mode is switched in this order;
OPTIMUM, STANDARD, DYNAMIC, MOVIE, PURE, GAME,
then USER.
• For PC source, the mode is switched between STANDARD
and USER.
You can also use the menu to change the options.
1 Press HOME MENU.
2 Select “Picture” ( / then ENTER).
3 Select “AV Selection” ( / then ENTER).
4 Select the desired option ( / then ENTER).
For AV source
For PC source
5 Press HOME MENU to exit the menu.
Note
• You can also press AV SELECTION on the remote control unit
to switch the viewing option.
• If you have selected “DYNAMIC”, you cannot select “Contrast”,
“Brightness”, “Color”, “Tint”, “Sharpness”, “Pro Adjust” and
“Reset”; these menu items are dimmed.
• If you have selected “OPTIMUM”, you cannot select “Pro
Adjust”; menu items in “Pro Adjust” are dimmed.
• To prevent the screen from damage, you can freely change the
AV selection mode while enjoying the Home Media Gallery
function. However, when you resume the Home Media Gallery
after having quit it, “STANDARD” is automatically selected for
the AV source.
• While enjoying the Home Media Gallery, you can freely change
the AV selection mode, but you cannot select “USER”.
• As the OPTIMUM function automatically optimizes image
quality, the process in which image settings such as
brightness and tint gradually change may be seen on the
screen. This is not a malfunction.
• When “OPTIMUM” is selected, images are reproduced based
on the information collected at the Room Light Sensor as well,
regardless of its setting (“On” or “Off”) for the “Option” menu.
Item Description
OPTIMUM Automatically adjusts the brightness of the image to the
optimum level in accordance with the brightness level of
the viewing area.
This selection is shared by the external input and TV
input sources.
STANDARD For a highly defined image in a normally bright room.
This selection is shared by the external input and TV
input sources.
DYNAMIC For a very sharp image with maximum contrast.
This mode does not allow manual image quality
adjustment.
This selection is shared by the external input and TV
input sources.
AV Selection
OPTIMUM
STANDARD
DYNAMIC
MOVIE
PURE
GAME
USER
MOVIE For movies.
This selection is shared by the external input and TV
input sources.
PURE Reflects input signals as faithfully as possible.
For example, you may select this option to check image
materials.
GAME Lowers image brightness for easier viewing.
This selection is shared by the external input and TV
input sources.
USER Allows you to customize settings as desired. You can set
the mode for each input source.
Item Description
STANDARD For a highly defined image in a normally bright room
USER Allows you to customize settings as desired. You can set
the mode for each input source.
Item Description
PRO1150HD.book Page 53 Tuesday, April 17, 2007 9:34 AM