Manufacturing reset, Useful remote control features 14 – Pioneer PRO-950HD User Manual

Page 93

Advertising
background image

93

En

Useful Remote Control Features

14

Manufacturing Reset

All learned and preset codes can be returned to the factory
defaults regardless of the mode.

1

Press EDIT/LEARN and TV a at the same time. The Mode
switch setting is ignored.

• The LED indicator flashes and the remote control unit

enters the Manufacturing Reset mode.

2

Press D (yellow) to reset the remote control.

• The manufacturing reset is complete. The LED flashes for

one second then the remote control unit returns to normal
operation.

Note

• To exit the Edit mode before it is complete, press

EDIT/LEARN

again.

• If the

Mode switch selection is changed when in the Edit

mode, the Edit session is canceled.

• If no operation is performed within one minute, the Edit

session is canceled.

• When you enter an unlisted code, the LED flashes repeatedly.

• If the tables on pages 94 to 98 do not include your device’s

manufacturer or the remote control does not work, use the
Learn mode.

• The initial mode is “PIONEER”.

• When using any of the receiver buttons (

a, INPUT, or VOL +/

) to cancel the Learn mode, follow the procedure with the
Mode switch
set to “TV”. You cannot cancel the mode
otherwise.

• You may not be able to partially or entirely control some

equipment in the tables.

PRO1150HD.book Page 93 Tuesday, April 17, 2007 9:34 AM

Advertising