Pioneer DVR-550HX-S - Manual (Page 134)

The Initial Setup menu 16
134
En
Options
On Screen Display On • The recorder displays operation displays ( Stop , Play ,
etc.) on-screen.
Off Switches off the on-screen operation displays.
Front Panel Display On • The time is shown in the front panel display when the
recorder is in standby.
Off The front panel display is switched off in standby.
Remote Control
Mode Recorder 1–3
(default: Recorder 1)
If you are using more than one recorder in the same
room, set them to different IDs. This setting sets the
recorder ID; to change the remote controller ID,
press and hold
RETURN/EXIT then press 1 , 2 or 3 to
set. The remote will only control a recorder with the
same ID.
AV. Link This Recorder
Only • Signals received through the AV input when the
recorder is in standby are not passed through to the
AV output.
Pass Through Signals received when in standby are passed though
to the output for connected devices. (Note that
during EPG data download, the EPG data is not
passed through.)
When set to Pass Through , make sure to set Power Save (page 122) to Off .
DivX VOD Registration Code Use to display the recorder’s DivX registration code.
See
DivX video compatibility on page 10 and DivX®
VOD content on page 11.
Set Preview
(HDD only)
Quick Preview • When in the Disc Navigator, the thumbnail video
plays short excerpts from throughout the selected
title. (Note that edited titles that will play normally
from the beginning.)
Normal The thumbnail video plays from the beginning of the
title.
CI Information Next Screen This option displays a menu of CI card functions.
Consult your service provider for more information
on the functions available.
Software Update Next Screen The Software Update function can check for and
download updated system software for the digital
tuner. See
Using Software Update (Digital tuner) on
page 136.
Setting Options Explanation
DVR550HXS_WV_EN.book 134 ページ ２００７年３月３０日 金曜日 午前１０時４８分