Using the digital electronic programme guide 06 – Pioneer DVR-550HX-S User Manual

Page 54

Advertising
background image

Using the digital electronic programme guide

06

54

En

2

Highlight the timer

programme you want to change

....

If you want to set a new timer programme,
select

‘New Input’

and skip to step

4

.

3

Press

then select ‘Modify’

from the command menu panel.

Alternatively, press

ENTER

.

The Timer Programme Set screen appears
from which you can edit the settings.

4

Enter the timer recording

settings.

Use the

/

buttons to select a field; use

the

/

buttons to change the value. For

more information on the options available at
the Timer Programme Set screen, See

Setting timer programmes

on page 51.

5

After entering all the timer

recording information, highlight ‘Store
Programme’ and press ENTER.

The timer recording list screen is displayed
again. The timer programme you just input
appears in the list. The rightmost column
shows various timer recording status
messages:

OK

– Can be recorded.

Time Over

– Not enough space on the

HDD (the recording won’t finish).

Over 12h

– Recording time of over 12

hours set (when recording to the HDD
the recording will be split into two titles).

Overlap

– Two timer programmes

partially or completely overlap. The one
starting earlier will take priority.

Until

... (eg.,

Until 13/8

) – For a regular

recording, the last programme that
could be recorded is shown.

Data Over

– Can’t record because the

disc management area of the disc is full.

• Cancel Once

– A regular timer

programme is set to skip.

• Can’t Rec

– Not possible to record.

Title Over

– Can’t record because there

is already the maximum number of titles
on the disc (HDD: 999; DVD: 99).

• Recording

– The programme is currently

recording.

• Standby

– The recorder is in timer

recording standby.

• Valid Until

... (eg.,

Valid Until 13/8

)

(UK

only)

– When you have set to make a

series recording of a programme that
has no new scheduled broadcasts, the
date displayed indicates the last day
until which the scheduled programme
settings remain valid. (If the programme
is not broadcast for over 13 weeks, its
settings are automatically deleted.)

• No Broadcast

(UK only)

– Displays when

a programme for which you had the

EPG

Link

set to

On

does not record because

the date of the scheduled recording has
already passed.

nothing displayed

– Another timer

recording or copying is in progress.

6

Press to exit the timer

recording screen.

Note

• If you set a DVD timer recording but

there is no recordable DVD disc loaded,
or the disc loaded doesn’t have enough
free space for the complete recording,

Recovery

is shown. In this case (unless

you load a suitable disc before the
recording actually starts), the recorder
will use the HDD for recording. (The
message

Can’t Rec

will appear if there

are already 999 titles on the HDD or if
there is not enough free space on the
HDD for recording.)

ENTER

ENTER

ENTER

HOME MENU

DVR550HXS_WV_EN.book 54 ページ 2007年3月30日 金曜日 午前10時48分

Advertising