Using the setup menu, Disc-dependent settings, Items not changeable during playback – Pioneer DVJ-1000 User Manual

Page 22

Advertising
background image

Preparations (Setup)

20

En <DRB1416>

To return all settings to their factory
defaults

Use this command to return all changed settings to their factory
default values.

1. Turn power OFF.
2. While holding the STOP button depressed, set

the POWER switch to ON, and continue holding
the STOP button until the “POWER ON”
indication goes off.

¶ All setting contents will be returned to their factory default

values.
The DJ mode functions listed below are set to the follow-
ing factory defaults in addition to the items in the Setup
Menu (P.19).
Auto Cue:

OFF

Auto Cue level: –60 dB
Jog mode:

VINYL ON

Time mode:

REMAIN

TV system setting for video output: AUTO

■ This command additionally erases all memory contents, in-

cluding “video memory” (

☞ P.24). Be sure you wish to delete

all memory contents before using this command.

Using the Setup Menu

Setup menu functions are disabled during DVD playback

in DJ mode, and during CD playback. Set the unit to stop,
or remove the disc before attempting setup operations.

The Setup Menu is used when you wish to modify the default
factory settings. The following instructions introduce the basic
operations and controls used with the Setup Menu.
¶ If you have not yet performed the basic setup using the Setup

Navigator, the Setup Navigator screen will appear first.

Confirm that power is turned ON, then

1. Press the SETUP button.

The Setup Menu will appear.
[Example]

V2

Video1

General

A2

Language

Exit

Move

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Audio1





Off
Dolby Digital
Off
96kHz

3 48kHz

MPEG

3 PCM

Setup audio
Digital output format/tone adjust

SETUP

2. Press the left and right sides of the cursor button

( / ) to move between the tags at the top of the
menu ([Audio1], [Audio2], [Video1], [Video2],
[Language], or [General]).

3. Use the upper and lower sides of the cursor

button ( / ) to select the desired setting item.

4. Press the cursor button’s right side ( ) to move to

the options list.

5. Use the upper and lower sides of the cursor

button ( / ) to move between options.

6. Press the ENTER button to confirm the selection.

Repeat steps 2 to 6 to modify other settings.

Tags

Usable operation buttons

7. Press the SETUP button.

The Setup Menu will close.

¶ If the Setup Menu is opened again after you have previously

made settings there, the previously shown menu screen will
appear.

Disc-dependent settings

Some setting changes are not supported, depending on the kind
of disc (DVD/CD) used. Whether a desired setting is supported
can be confirmed by viewing the indicator color at the left of the
selected setting item. Consult the accompanying table for infor-
mation regarding what settings are supported for each disc type.
Changed settings become effective immediately.

Language

A2

V2

General

Audio1

Video1

Exit

Move

OSD Language

Audio Language

Subtitle Language

Auto Language

English
French
German
Italian
Spanish
Other

Setup disc's subtitle language

SETUP

Indicator Color

Disc Type

Blue, Yellow

DVD only

Green

All

Items not changeable during playback

Items that cannot be set during playback are displayed in grey.
Perform this operation in the stop mode, or when no disc is
loaded.

Indicator




Language

A2

V2

General

Audio1

Video1

Move

OSD Language

Audio Language

Subtitle Language

Auto Language

English
English
English
On

Grey

Advertising