Panasonic CF-07 Series - Manual (Page 35)

35
T
roubl
eshoot
in
g
8
Select [1. Yes, I agree to the provisions above and wish to continue!].
This screen should appear.
9 Make a selection from the menu.
To select [2], the initial partition size must be 3 GB or more of the hard disk size.
Reinstallation cannot be performed with a small partition size.
10
At the confirmation message, press Y .
The operation of reinstallation for the hard disk starts automatically. (The operations
take about 20 minutes.)
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
Reinstalling : Windows(R) XP Professional
1. Reinstall Windows to the whole HDD to factory default.
2. Reinstall Windows to the first partition.
0. Cancel
---------------------------------------------------------------------
12
Restart the computer by pressing Ctrl + Alt + Del and press F2 while
[Panasonic] screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password.
Do not interrupt the reinstallation procedure before completion, for example
by turning off the computer or pressing Ctrl + Alt + Del , as this may
prevent Windows from starting up, or may cause data to be lost so that the
reinstallation procedure cannot be executed.
When a message appears instructing you to insert the next CD, insert the re-
covery CD showing the next number in the sequence, and then select [OK].
If the message “The media does not contain the correct file” appears, select
[OK]. A message will appear instructing you to insert the next CD.
Confirm that the proper recovery CD has been inserted by opening the tray of
the CD-ROM drive and then close the tray, then select [OK].
CAUTION
--------------------------------------------------------------------------
[Recovery] is complete.
Windows(R)XP Professional install wizard will start after reboot.
Please Remove the Product Recovery CD-ROM, and press
Ctrl + Alt + Del (Delete) to reboot.
--------------------------------------------------------------------------
11
After the reinstallation procedure completes, this screen should appear.
Remove the Product Recovery CD-ROM.