Pioneer KEH-P6020RB - Manual (Page 15)

04
Section
RDS
En 15
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Using auto PI seek for preset stations
When present stations cannot be recalled, as
when travelling long distances, the unit can be
set to perform PI seek during preset recall.
• The default setting for auto PI seek is off. See
Switching auto PI seek on page 34.
Limiting stations to regional program-
ming
When AF is used to automatically retune fre-
quencies, the regional function limits the selec-
tion to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until REG appears in the dis-
play.
2 Press
5 to turn the regional function on.
Press
5 and
REG :ON is displayed.
3 Press
∞ to turn the regional function off.
Press
∞ and
REG :OFF is displayed.
Notes
• Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
• The preset number may disappear on the
display if the tuner tunes in a regional station
which differs from the originally set station.
• REG can be turned on or off independently for
each FM band.
Receiving traffic announcements
TA (traffic announcement standby) lets you
receive traffic announcements automatically,
no matter what source you are listening to. TA
can be activated for both a TP station (a station
that broadcasts traffic information) or an
enhanced other network’s TP station (a station
carrying information which cross-references TP
stations).
1 Tune in a TP or enhanced other network’s
TP station.
When you are tuned into a TP or enhanced other
network’ s TP station the
TP indicator will light.
2 Press TA to turn traffic announcement
standby on.
Press
TA and the TA indicator appears in the
display. The tuner will standby for traffic
announcements.
• To turn traffic announcements standby off,
press
TA again.
3 Use VOLUME to adjust the TA volume when
a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
4 Press TA while a traffic announcement is
being received to cancel the announcement.
The tuner returns to the original source but
remains in the standby mode until
TA is pressed
again.