Multi-cd player, Playing a cd, Disc multi-cd player – Pioneer KEH-P6020RB User Manual

Page 20

Advertising
background image

06

Section

En

20

Multi-CD Player

Playing a CD

You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 21.

1

DISC NUMBER

indicator

Shows the disc currently playing.

2

TRACK NUMBER

indicator

Shows the track currently playing.

3

PLAY TIME

indicator

Shows the elapsed playing time of the cur-
rent track.

1 Press

SOURCE

to select the multi-CD

player.
Press

SOURCE

until you see

Multi-CD

displayed.

2 Use

VOLUME

to adjust the sound level.

Rotate to increase or decrease the volume.

3 Select a disc you want to listen to with the

1

to

6

buttons.

For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as

1

for disc 7, until the disc number

appears in the display.
• You can also sequentially select a disc by
pressing

5/∞.

4 To perform fast forward or reverse, press
and hold

2 or 3.

5 To skip back or forward to another track,
press

2 or 3.

Pressing

3 skips to the start of the next track.

Pressing

2 once skips to the start of the current

track. Pressing again will skip to the previous
track.

Notes

• When the multi-CD player performs the

preparatory operations,

READY

is displayed.

• If the multi-CD player does not operate prop-

erly, an error message such as

ERROR-14

may

be displayed. Refer to the multi-CD player
owner’s manual.

• If there are no discs in the multi-CD player

magazine,

NO DISC

is displayed.

50-disc multi-CD player

Only those functions described in this manual
are supported for 50-disc multi-CD players.

2

3

1

Advertising
This manual is related to the following products: