Installation guide, Remove the unit, Install removable face plate – Panasonic CQ-DP151 EN User Manual

Page 9

Advertising
background image

E
N

G

L

I

S
H

14

CQ-DP151/DP101W

31

E
N

G

L

I

S
H

13

CQ-DP151/DP101W

30

Installation Guide

(Continued)

Remove the removable face plate.
1 Press [

'] (release button). The removable

face plate will be released.

2 Pull on the right side of the unit.

1

2

Remove the Unit

7 Trim plate

<

<

SOURCE

REP

RANDOM

PWR

Remove the trim plate 7 with a screwdriver.

Pull out the unit while pushing down the lock
lever with a screwdriver.

Remove the unit pulling with both hands.

1

Contact

Main unit

Lock lever

Screwdriver

Install Removable Face Plate

1 Slide the left side of the removable face plate in

place.

2 Press the right end of the removable face plate

until “click” is heard.

Cautions:

This face plate is not water-proof. Do not expose it to water or excessive moisture.

Do not remove the face plate while driving your car.

Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.

Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.

If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or
it might be damaged.

2

1

<

Plastic tab

2

3

4

Switch off the power of the unit.

Lock lever

Cutout

Release button

Advertising