Poulan 433552 - Manual (Page 10)

10
LUBRICATION CHART
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must main tain
tiller as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tiller.
At least once a season, check to see if you should make
any of the adjustments described in the Service and Ad-
justments section of this manual.
• Once a year you should replace the spark plug, clean
or replace air filter, and check tines and belts for wear.
A new spark plug and clean air filter assure proper air-
fuel mixture and help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check tine operation.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See “LUBRICATION CHART”).
MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Engine Oil Level
Change Engine Oil
Oil Pivot Points
Clean Air Cooling System
Inspect Spark Arrester / Muffler
Clean Air Filter
Clean Area Around Muffler And Controls
Replace Spark Plug
Replace Air Filter
BEFORE EA
CH USE
EVER
Y 8 HOURS
FIRST 5 HOURS EVER
Y 25 HOURS OR ANNU
ALL
Y
EVER
Y 50 HOURS OR ANNU
ALL
Y
ANNU
ALL
Y
SERVICE DATES
1,2
2
2
3
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Initial oil change should be performed after first five (5) hours of operations.
c SAE 30 OR 10W-30 MOTOR OIL
d REFER TO MAINTENANCE “ENGINE” SECTION
MAINTENANCE
d EN GINE
c TINE CON TROL