Panasonic KX-TG7644 - Manual (Page 17)

CELL 1/CELL 2 indicators on the
base unit
The CELL 1/CELL 2 indicators show
each cellular line status.
Status Meaning
Green
(On) A cellular phone is
connected. Ready to
make/receive cellular calls.
Green
(Flashing) – The cellular line is in
use.
– Phonebook entries are
being copied from a
cellular phone
(page 54).
Green
(Flashing
rapidly) A cellular call is being
received.
Amber
(On) A cellular phone is not
connected to the base unit
(page 21).
Amber
(Flashing
rapidly) The base unit is searching
for the registered cellular
phone.
Red
(Flashing) – The base unit is
registering a cellular
phone.
– A cellular call is put on
hold.
Light off A cellular phone is not
registered to the base unit.
HEADSET indicator on the base unit
The HEADSET indicator shows the
Bluetooth headset status.
Status Meaning
Green
(On) A Bluetooth headset is
connected to the base
unit. Ready to use it.
Green
(Flashing) A Bluetooth headset is in
use.
Status Meaning
Green
(Flashing
rapidly) A landline call is being
received.
Amber
(On) The Bluetooth headset is
not connected to the base
unit.
Amber
(Flashing
rapidly) The base unit is searching
for the registered
Bluetooth headset.
Red
(Flashing) – The base unit is
registering a headset.
– Mute is turned on.
Light off A Bluetooth headset is not
registered to the base unit.
Initial settings
n Direct command code:
Programmable settings can be
accessed by pressing MMENUN, #
and then the corresponding code on
the dial keypad (page 39).
Example: Press MMENUN#101.
n Symbol meaning:
Symbol Meaning
Perform with the
handset.
Perform with the base
unit.
Example:
MbN: “Off” Press MCN or MDN to
select the words in
quotations.
Date and time
Important:
R When you install the batteries for the
first time, the handset may prompt
you to set date and time. First press
MSELECTN, then proceed to step 2.
For assistance, please visit http://www.panasonic.com/help 17
Getting Started