Panasonic KX-TG7644 - Manual (Page 50)

– the base unit may not be able to
display *1 or announce the entire
name.
R The announcement is heard at the
same level as the ringer volume
(page 41, 43).
R If you turn on the answering system
and set the number of rings “2
rings” (page 62), the unit does not
announce the caller information from
the landline. If “Toll saver” is
selected and there is a new message,
the unit does not announce the caller
information from the landline.
R When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to
both Caller ID and Call Waiting with
Caller ID services.
*1 KX-TG7641 series: page 3
Phonebook name announcement
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Ringer ID
You can select the desired ringer tone to
a group that each phonebook entry is
assigned (page 36). When a call is
received from a caller assigned to a
group, the ringer tone you selected for
that group rings instead of the called
line’s ringer tone (page 20, 41, 43) after
caller information is displayed. If you
select “Current ringer” (default),
the unit uses the called line’s ringer tone
when calls from this group are received.
1 M N a MMENUN
2
MbN: “Group” a MSELECTN
3
MbN: Select the desired group. a
MSELECTN
4
MbN: Select the desired ringer tone.
a MSAVEN
5 MOFFN
Caller list
Important:
R Only 1 person can access the caller
list at a time.
R Make sure the unit’s date and time
setting is correct (page 17).
Viewing the caller list and
calling back
n Using a cellular line
Handset
1
MFN CID
2 Press M N to search from the most
recent call, or M N to search from the
oldest call.
3
To call back, press MSELECTN.
To exit, press MOFFN.
4
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is
registered.
– a specific line is set to make
cellular calls (page 22).
5
MbN: Select the desired cellular
phone. a MSELECTN
Base unit *1
*1 KX-TG7641 series: page 3
1
M N CID
2
Press MCN to search from the most
recent call, or MDN to search from the
oldest call.
3 To call back, press MCELL 1N or
MCELL 2N.
To exit, press MnN (EXIT).
50 For assistance, please visit http://www.panasonic.com/help
Caller ID Service