Panasonic WV-NW470S - Manual (Page 30)

-30-
You can reset the following data back to the factory
default settings.
Camera Setup
Setup Menu (PC oriented)
HTML files
■ Initializing the Camera Menu
• Move the cursor to CAMERA RESET.
• Hold down [Left], [Right], and [SET] buttons simulta-
neously for 2 seconds on the camera, or click the All
Reset button on your computer display.
■ Initializing the Setup Menu
• In the power-on state, press the [Up] and [Down]
buttons simultaneously while holding down the but-
ton A.
Hold down the button A for 15 seconds. It will take
about 10 seconds to complete the initializing. Be
sure to continue supplying power to the camera
while initializing.
Notes:
• Clock calibration is required even after initializing
the setup menu.
• Try again if the previous initializing failed.
■ Initializing HTML Files
• In the power-on state, press the side panel buttons,
[Up] and [Down] simultaneously while holding down
the button B.
Hold down the button B for 15 seconds. It will take
about 10 seconds to complete the initializing. Be
sure to continue supplying power to the camera
while initializing.
Notes:
• Never press both the buttons A and B at a time.
• Try again if the previous initializing failed.
INITIALIZING