Pioneer VSX-D914 - Manual (Page 29)

Controls and displays 05
29
En
Display
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when AUTO signal select is on.
SB
Depending on the source, this lights
when a signal with surround back
channel encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
2 DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a DTS
signal.
3 2 DIGITAL
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II ( x )
When the ( STANDARD ) Pro Logic II mode of
the receiver is on, this lights to indicate Pro
Logic II decoding. The
x lights to indicate Pro
Logic IIx decoding (see Listening in surround
sound on page 35 for more on this).
5 VIR.SB
Lights during Virtual surround back
processing.
6 DIRECT
Lights when source direct playback is
selected. Direct playback bypasses the tone
controls and channel levels for the most accu-
rate reproduction of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 SLEEP
Lights when the receiver is in sleep mode.
9 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
10 Speaker indicator
Shows the speaker system currently in use.
x
1 2 3 4 5 6 7 8 9 10
11 16 14 13 12 15
VSX_D912.book.fm 29 ページ ２００３年１２月５日 金曜日 午前９時４３分