Additional information 11 – Pioneer VSX-D914 User Manual
Page 66
Additional information
11
66
En
Broadcast stations cannot be
selected automatically.
• Connect an outdoor antenna (refer to page 20).
No sound from surround or
center speakers.
• Refer to
Speaker setting
on page 43 to check the speaker settings.
• Refer to
Manually calibrating your listening area (MCACC)
on
page 49 or the (VSX-D914 model only)
Quick surround sound setup
on page 14 to check the speaker levels.
• Connect the speakers properly (refer to page 21).
No sound from surround
back speakers.
• Refer to
Surround back speaker setting
on page 44 to check the sur-
round back speaker settings.
• Refer to
Manually calibrating your listening area (MCACC)
on
page 49 or the (VSX-D914 model only)
Quick surround sound setup
on page 14 to check the speaker levels.
• Refer to
Using the Surround Back Channel (SB CH)
on page 38 to
make sure the
SB CH MODE
and the sound mode are set for sur-
round back sound.
No sound from subwoofer.
• Make sure the subwoofer is switched on.
• If the subwoofer has a volume knob, make sure it’s turned up.
• Switch the
Subwoofer setting
on page 44 to
YES
or
PLUS
.
• Switch the
LFE attenuator setting
on page 45 to
0 dB
or
10 dB
.
• The Dolby Digital or DTS source you are listening to does not have
an LFE channel.
Noise during playback of a
cassette deck.
• Move the cassette deck further from your receiver, until the noise
disappears.
Sound is produced from
other components, but not
from LD or DVD player.
• Set the
SIGNAL SELECT
to
AUTO
,
DIGITAL
or
ANALOG
accord-
ing to the type of connections made. (refer to page 37).
• Set the digital input settings correctly (refer to page 47).
• Make digital connections (refer to page 17) and set the
SIGNAL
SELECT
to
DIGITAL
(refer to page 37).
• Refer to the instruction manual supplied with the DVD player.
No sound is output or a noise
is output when software with
DTS is played back.
• Set the digital volume level of the player to full, or to the neutral
position.
When a search is performed
by a DTS compatible CD
player during playback, noise
is output.
• This is not a malfunction, but be sure to turn the volume down to
prevent the output of loud noise from your speakers.
Problem
Remedy
VSX_D912.book.fm 66 ページ ２００３年１２月５日 金曜日 午前９時４３分