Pioneer KEH-P1010R - Manual (Page 27)

Initial Setting Menu Functions
The Initial Setting Menu features the following functions.
Changing the FM Tuning Step (STEP)
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
1. Press the AUDIO button and select the FM Tuning Step mode (STEP) in the
Initial Setting Menu.
Note:
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Switching the Auto PI Seek (A-PI)
During Preset Station PI Seek operation, you can switch the Auto PI Seek function
ON/OFF. (Refer to “PI Seek Function” on page 11.)
1. Press the AUDIO button and select the Auto PI Seek mode (A-PI) in the
Initial Setting Menu.
2. Switch the Auto PI Seek
ON/OFF with the +/– buttons.
2. Select the desired tuning step
with the
2/3 buttons.
26
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS