Panasonic AG-HVX200 - Manual (Page 112)

112
Setup menu list (continued)
DUBBING SETUP screen
AV IN/OUT SETUP screen
Item
Display
mode
Description of settings
CMPNT OUT SEL
P2
(Camera)
(MCR) Selects the type of component terminal.
720P: Monitor which supports the D4 terminal
1080i: Monitor which supports the D3 terminal
480i: Monitor which supports the D1 terminal
The signals recorded in the 720P format are cross-converted only when 1080i
format signals are to be output. In all other cases, they are output without being
converted.
HP MODE
P2 TAPE
(Camera) Selects the sound heard through the headphones.
LIVE:
The sound which has been input from the microphone is output as is. This
setting is selected when delays in the sound are annoying.
RECORDING:
The sound in the status which is to be recorded (the sound synchronized with
the images) is output.
A. DUB INPUT
TAPE
(VCR) Selects the audio to be recorded for audio dubbing. (Page 81)
MIC:
This sets the input from the internal microphone, INPUT1 and INPUT2
connectors.
A_IN:
This sets the input from the AUDIO IN/OUT connector.
1394 OUT
TAPE
(VCR) Select ON to convert analog input signals into digital signals and output them
from the 1394 terminal.
ON OFF
indicates the factory setting.
Item
Display
mode
Description of settings
FORMAT SEL (DUB) Selects the format of the clips to be played back during dubbing.
1080i/60i, 1080i/30P, 1080i/24P, 1080i/24PA, 720P/60P, 720P/30P, 720P/24P,
720P/30PN, 720P/24PN
PULLDOWN SEL (DUB) Selects the pulldown method for 24PN (native format).
24P:
The 24 fps images are converted into 60-field interlace signals by the 2:3
conversion system.
24PA:
The 24 fps images are converted into 60-field interlace signals by the 2:3:3:2
advanced conversion system.
SETUP (DUB) Switch the setup level of video signals in 480i format for dubbing.
0%:
Setup is switched to 0% for both the camera output and the recording.
7.5%:
Setup is switched to 7.5% for both the camera output and the recording.