Panasonic AG-HVX200 - Manual (Page 119)

Men
u
119
Item
Display
mode
Description of settings
1394 STATUS
P2 TAPE
(Camera)
(MCR/
VCR) 1394 status display screen appears.
• When a P2 card is used
FORMAT: Format of the signals which are input or output.
RATE: Transfer rate of the signals which are input or output.
60/50: System of the signals which are input or output.
CH: Value of the channels in which the signals are input or output.
SPEED: Transfer speed of the signals which are input or output.
STATUS: Status of the signals which are input or output using the IEEE1394
digital interface.
VIDEO: Status of the video signals which are input or output.
AUDIO: Status of the audio signals which are input or output.
• When a tape is used
FORMAT: Format of the signals which are input or output.
RATE: Transfer rate of the signals which are input or output.
60/50: System of the signals which are input or output.
CH: Value of the channels in which the signals are input or output.
SPEED: Transfer speed of the signals which are input or output.
MODE: Status of the signals which are input or output using the IEEE1394
digital interface.
RX: Reception status
TX: Transmission status
1394 CONFIG
P2
(Camera)
(MCR) 1394 extended menus appear.
DFLT: Normally, DFLT is used.
1-255
indicates the factory setting.
OPTION MENU
This menu is displayed when the DISP/MODE CHK button is held down, and after the details of the
shooting status are displayed, the MENU button is then pressed.
Use it to check the connection status during nonlinear editing.