Manual programming without ’video plus – Pioneer VR805/07 User Manual
Page 13
i
Please note that you inserted a cassette without erase
protection. Switch off with the
STANDBY m
button.
The programmed recording will only function when the
video recorder is switched off with the
STANDBY m
but-
ton.
D If one or more of the TIMER blocks are occupied, ’
k
’
lights up in the display.
D If the end of the cassette is reached during a recording,
the cassette will automatically be ejected.
D If you forget to load a cassette, ’NO CASSETTE’ appears
on the TV screen and ’
k
’ lights up in the display.
D If you inserted a cassette with erase protection when you
want to start a recording, the cassette will be ejected.
D Programme numbers ’E1’ and ’E2’ are provided for
external recordings (via scart socket
AV1 EXT1
or
AV2 EXT2
).
D Programme number ’AUX’ is provided for audio record-
ings via sockets
AUX IN L R
.
Manual programming without ’VIDEO Plus+’
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
TIMER s
button on the remote control.
The programming mode selected last is marked.
c
Select the line ’TIMER PROGRAMMING’ with the menu
buttons
P =
or
P ;
and confirm with the
P
button.
TIMER
TIMER PROGRAMMING
VPS
DATE
PROG. START PDC END
LP
01
01
20:00
21:30
________________________________
TO STORE
PRESS
OK
d
Select the entry field with the menu buttons
Q
or
P
.
e
Enter data with the menu buttons
P =
or
P ;
or with the
digit buttons
0-9
.
D Select recording at daily or weekly intervals in the field
’DATE’, with the
SELECT
button.
’MO-FR’: Recording to be made from Mondays to Fridays
inclusive.
’MO’: Weekly recordings on the same weekday.
D Use the
SELECT
button to switch ’VPS/PDC’ on or off in
’START’.
D Use the
SELECT
button to select the recording speed ’SP’
or ’LP’ in ’END’.
f
Confirm with the
OK
button.
D The data has been stored in a TIMER block.
g
To end, press the
TIMER s
button.
h
Please note that you inserted a cassette without erase
protection. Switch off with the
STANDBY m
button.
The programmed recording will only function when the
video recorder is switched off with the
STANDBY m
but-
ton.
D If one or more of the TIMER blocks are occupied, ’
k
’
lights up in the display.
D If the end of the cassette is reached during a recording,
the video recorder automatically ejects the cassette. The
set switches off after a few minutes.
D If you forget to load a cassette, ’NO CASSETTE’ appears
on the TV screen and ’
k
’ lights up in the display.
D If you inserted a cassette with erase protection, the
cassette will be ejected.
D Programme numbers ’E1’ and ’E2’ are provided for
external recordings (via scart socket
AV1 EXT1
or
AV2 EXT2
).
D Programme number ’AUX’ is provided for audio record-
ings via sockets
AUX IN L R
.
13