Pioneer VR805/07 - Manual (Page 15)

Changing the TV system
If you play back recordings made on another video recorder,
the automatic TV system switch-over may lead to colour
interferences.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the menu
buttons
P = or P ; and confirm with the P button.
d In the line ’TV SYSTEM’ select the required TV system
with the menu buttons
Q or P .
e Confirm with the OK button.
f To end, press the MENU button.
D If colour interference still occurs, you can switch to ’B/W’
(black and white) in line ’TV SYSTEM’.
Child lock
a With the video recorder switched on, press the
CHILD LOCK u button on the remote control for a few
seconds until ’ ’ appears in the video recorder display.
Keep the remote control in a safe place.
b If you want to switch off the child lock, press the
CHILD LOCK u button again for a few seconds until ’ ’
disappears from the video recorder display.
D If a button is pressed with activated child lock, ’ ’
flashes in the display for a few seconds.
D Programmed recordings are made despite activated child
lock and cannot be interrupted.
You can also switch the child lock on and off with the menu
button
P in the menu ’SPECIAL SETTINGS’, in line ’CHILD
LOCK’.
Setting the On Screen Display (OSD)
You can switch the On Screen Display of the current operating
information on or off.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the menu
buttons
P = or P ; and confirm with the P button.
MAIN MENU
SPECIAL SETTINGS
} TV SYSTEM | PAL }
{ CHILD LOCK OFF
OSD MODE AUTO.
16:9 WIDE SCREEN OFF
VCR 1 OR 2 VCR 1
REPEAT PLAY OFF
AUTO STANDBY ON
DEMO OFF
________________________________
TO EXIT
PRESS
MENU
d Select the line ’OSD MODE’ with the menu buttons P = or
P ; .
e Select one of the options indicated with the menu buttons
P or Q .
’AUTO.’: OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’OFF’: OSD is switched off.
’ON’: OSD is switched on.
f Confirm with the OK button.
g To end, press the MENU button.
D With the
OK button you can superimpose the On Screen
Display of current operating mode on the TV screen.
5. ADDITIONAL FUNCTIONS
15