The ’demo’ function, Poor tv reception - optimize the modulator, Switching off the modulator – Pioneer VR805/07 User Manual

Page 17

Advertising
background image

d

Select the line ’AUTO STANDBY’ with the menu buttons

P =

or

P ;

.

e

Select ’ON’ with the menu buttons

Q

or

P

. If you se-

lect ’OFF’, the function will be switched off.

f

Confirm with the

OK

button.

g

To end, press the

MENU

button.

D A TIMER recording only functions when the video

recorder is switched to standby.

The ’DEMO’ function

When the ’DEMO’ function is switched on and the video
recorder switched off, several menus will be demonstrated on
the TV screen. This has no influence on operating the video
recorder.

a

Switch on the TV set. If required, select the programme
number for the video recorder.

b

Press the

MENU

button. The main menu appears.

c

Select the line ’SPECIAL SETTINGS’ with the menu
buttons

P =

or

P ;

and confirm with the

P

button.

d

In the line ’DEMO’, select ’ON’ with the menu buttons

P

or

Q

.

If you select ’OFF’ the function will be switched off.

e

Confirm with the

OK

button.

f

To end, press the

MENU

button.

D The ’DEMO’ function is not possible during a ’TIMER

recording’ and during an ’Automatic recording from a
satellite receiver’.

Poor TV reception - Optimize the modulator

With ’Connecting without scart cable’, UHF-channel CH35or
583MHz might already be being used by another TV station in
your reception area. In this case the picture quality on your TV
set will be adversely affected when receiving one or more TV
channels.

a

Ensure that no cassette has been loaded. On the video
recorder, simultaneously hold the

STOP/EJECT ?

and

the

PLAY G

button for a few seconds until e.g.: ’CH35’

or ’583’ appears in the display. The video recorder
transmits a test picture on this UHF-channel (or this
frequency).

INSTALLATION

OPTIMIZE MODULATOR

} OPTIMIZE

| CH35

}

{

MODULATOR

ON

CHANNEL/FREQ.

CH

________________________________

TO EXIT
PRESS

MENU

b

In line ’CHANNEL/FREQ.’ select the indication for channel
’CH’ or frequency ’FREQ.’, using the menu buttons

P

or

Q

.

c

Select the line ’OPTIMIZE’ with the menu buttons

P ;

or

P =

. Press the menu button

P

.

d

When the video recorder finds a ’free’ TV channel, the
channel or frequency will be indicated.

D You can also enter the channel or frequency directly with

the digit buttons

0-9

.

e

Tune in the TV set in this channel or frequency.

f

Confirm the channel or frequency indicated with the

OK

button.

g

To end, press the

MENU

button.

Switching off the modulator

If you cannot eliminate picture or sound interference, you can
switch off the built-in modulator. You should only do this if you
have connected the video recorder to the TV set with a scart
cable. ’Connecting VCR without scart cable’ is not possible
when the modulator is switched off.

17

Advertising