Pioneer VR805/07 - Manual (Page 7)

Setting the clock and the date
If the time in the video recorder display is not correct or if
’--:--’ appears in the display, please set the clock manually.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’INSTALLATION’ with the menu buttons
P = or P ; and confirm with the P button.
d Select the line ’TIME/DATE’ with the menu buttons P = or
P ; and confirm with the P button.
INSTALLATION
TIME/DATE
z TIME 20:00
YEAR | 1998 }
{ MONTH 02
DATE 06
________________________________
TO EXIT
PRESS
MENU
e Adjust ’TIME’, ’YEAR’, ’MONTH’, ’DATE’ if required, using
the digit buttons
0-9 . Switch between fields with the
menu buttons P = or P ; .
f Confirm each entry with the OK button.
g To end, press the MENU button.
D If a TV channel which transmits TXT/PDC is stored with
programme number ’P01’, time (from TXT) and date (from
PDC) will automatically be taken from the TXT/PDC
information.
User guide (OSD)
With OSD (On Screen Display) the corresponding functions
appear on the TV screen as a menu. The most important
button-functions are displayed at the bottom of the screen.
E Call up the menu: With the
MENU button.
E Select a line: With the
P = or P ; button.
E Select within a line: With the menu buttons
Q or
P .
E Enter/Alter: With the
Q or P or with the 0-9 button.
E Store: With the
OK button.
E Confirm: With the menu button
P .
E Exit menu: With the
MENU button.
Emergency interrupt
Both the video recorder and the remote control have an
’Emergency interrupt’ button. You can use the
STANDBY m but-
ton to interrupt any function.
Whenever you have operating problems you can simply
interrupt the function and start again.
You can practise operating your set without any worries. No
matter which buttons you press, you cannot damage it.
Important notes for operation
E You can switch on with the
STOP h button, the 0-9 but-
tons or by inserting a cassette.
E Keep your video recorder connected to the mains at all
times to ensure that programmed recordings can be
made and that the television functions normally. The
power consumption required is less than 4W (saving
energy mode).
E When the video recorder is disconnected from the mains,
TV channels will be strored typically 1 year, and
clock/timer data will be stored typically 7 hours.
Saving energy
You can choose between two methods of switching to
standby.
Normal method: Switch to standby using the
STANDBY m but-
ton. The clock time remains displayed.
If the clock has not been set, ’--:--’ appears.
To save energy: Press the
STANDBY m button twice. The clock
time disappears from the display.
7