Playback, Playback a cassette, Ntsc playback – Pioneer VR805/07 User Manual

Page 8: Tape position indication, Still picture/slow motion, Instant view

Advertising
background image

Playback a cassette

a

Insert a cassette into the cassette slot.

b

Press the

PLAY G

playback button.

c

To stop, press the

STOP h

button.

d

To eject, Press the

STOP/EJECT ?

button on the set.

D Some hired cassettes may have a poor picture/sound

quality. This is not a fault in your set. Please read the
section ’Eliminating picture interference’.

D Some functions switch off automatically after a while

(e.g.: Pause, Still Picture, Scanning). This helps to protect
the cassette and prevent unnecessary power consump-
tion.

NTSC Playback

With this set you can playback cassettes that have been
recorded on another video recorder in the NTSC standard.
This only works for PAL-television sets which are suitable for a
picture frequency of 60 Hz.
During NTSC playback ’60HZ’ appears in the display.

D During NTSC-playback some special features (e.g. still

picture) are not possible.

Tape position indication

a

During playback press the

COUNTER

button.

b

Select one of the following options:
’TIME USED’ to indicate the time used on the tape
’TIME LEFT’ to indicate the time left on the tape
’COUNTER’ to indicate the actual position on the tape

D With the

OK

button, you can superimpose the actual

tape position on the TV screen.

Searching for tape position with picture
(picture search)

a

During playback, press the

H

(reverse) or

I

(for-

ward) button once or several times.

b

To interrupt at the position required, press the

PLAY G

button.

D During picture search, the picture quality is affected and

the sound is turned off.

Still picture/Slow motion

a

Press the

STILL R

button. A still picture appears on the

screen.

b

Each time you press

STILL R

again the picture will

move on one step.

c

When you hold the

STILL R

button the picture will be

played in slow motion.

d

When you press the

I

button several times, you have

a choice of several playback speeds.
During slow motion the sound is switched off.

Searching for tape position without picture
(wind/rewind)

a

Stop the tape with the

STOP h

button.

b

Press the

H

(reverse) or

I

(forward) button.

c

To interrupt at the position required, press the

STOP h

button.

Instant View

With this function you can switch to picture search during
wind/rewind.

a

If you hold the

H

(rewind) or

I

(wind) button dur-

ing wind or rewind, you will switch to picture search.

b

If you release the button, the video recorder will
automatically switch back to rewind or wind.

2.

PLAYBACK

8

Advertising