Setting the clock, Selecting video on rear display, Other functions – Pioneer AVH-P5700DVD User Manual

Page 97

Advertising
background image

3 Touch c or d to select the display to

open/close automatically or manually.

Touch c to select MANUAL, and you have to

press OPEN/CLOSE to open/close the display.

Touch d to select AUTO, and the display auto-

matically opens/closes when power to this

unit is turned on.

Setting the clock

Use these instructions to set the clock.

1 Touch CLOCK ADJUST on the setup

menu.

2 Touch OFF to turn the clock display on.

ON will appear in the display instead of OFF.

Clock display is now on.

# To turn the clock display off, touch ON.

3 Touch c or d to select the segment of

the clock display you wish to set.

Each time you touch c or d it will select one

segment of the clock display:

HourMinute

As you select segments of the clock display

the segment selected will be highlighted.

4 Touch a or b to set the clock.

Each time you touch a it increases the se-

lected hour or minute. Each time you touch b

it decreases the selected hour or minute.

Notes

! You can match the clock to a time signal by

touching JUST.
 If the minute is 0029, the minutes are

rounded down. (e.g., 10:18 becomes
10:00.)

 If the minute is 3059, the minutes are

rounded up. (e.g., 10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display.

Selecting video on rear display

You can set the rear display to automatically

switch to the navigation image or AVG-VDP1

with the front display. Alternatively, you can

set it to remain showing the selected video

source and not change with the front display.

! The navigation image or the AVG-VDP1 can

be displayed when a Pioneer navigation

unit or a Vehicle Dynamics Processor is

connected to this unit.

! When selecting SOURCE and the selected

source is an audio source, nothing is dis-

played on rear display.

% Touch R.DISP on the setup menu to dis-

play video of the selected source on rear

display.

Touch R.DISP until the desired video setting

appears in the display.

! SOURCE  Display the video of the selected

source on rear display

! NAVI  Display the navigation image or

AVG-VDP1 on rear display

Other Functions

En

97

Section

20

Other

Functions

Advertising