Panasonic KX-FLM671 - Manual (Page 19)

2. Preparation
19 For assistance, please visit http://www.panasonic.com/help
Document Requirements
2.4 Setting the original
1 Adjust the width of the document guides (
1) to fit
the actual size of the document.
2 Insert the document (up to 20 pages) FACE DOWN
into the feeder until a single beep is heard and the
unit grasps the document.
Note:
L Check that any ink, paste or correction fluid has dried
completely.
L Remove clips, staples or other fasteners.
L Do not insert the following types of documents:
(Make a copy of the document and set the copy
instead.)
–
Chemically treated paper such as carbon or
carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint
L To set a document with a width of less than 210 mm
(8
1
/
4
"), we recommend using a copy machine to copy
the original document onto A4 or letter-size paper,
then setting the copied document.
L Do not set documents that do not satisfy the
requirements of size and weight. Make a copy of the
document using a copy machine and set the copy.
L Available document size, document weight and
effective scanning area are as follows:
Minimum document size
Maximum document size
Effective scanning area
L Shaded area will be scanned.
Document weight
L Single sheet:
45 g/m
2
to 90 g/m
2
(12 lb to 24 lb)
L Multiple sheets:
60 g/m
2
to 80 g/m
2
(16 lb to 21 lb)
1
128 mm
(5")
128 mm
(5")
600 mm
(23
5
/ 8
")
216 mm
(8
1
/
2
")
216 mm (8
1
/
2
")
208 mm (8
3
/
16
")
4 mm (
5
/
32
") 4 mm (
5
/
32
")
4 mm (
5
/
32
")
4 mm (
5
/
32
")