About dv, Playing and recording from a dv camcorder 08 – Pioneer RCS-LX60D User Manual

Page 103

Advertising
background image

Playing and recording from a DV camcorder

08

103

En

About automatic finalization

If you use a DVD-R/-RW (Video mode) or DVD+R/+RW
disc for copying, it will automatically be finalized after
copying is complete.

• You can’t customize the background for DVD-R/-RW

or DVD+R/+RW disc finalization.

• No title names are assigned.

• If you want to give the disc a name, please do so

before you start the copy (see

Input Disc Name

on

page 132).

• If a timer recording is scheduled to start, and in some

other instances, the disc will not be finalized.

Frequently Asked Questions

• I can’t get my DV camcorder to work with the recorder!

Check that the DV cable is properly connected. Also
make sure that what you’re trying to record is not
copy-protected.

If it still doesn’t work, try switching off the camcorder
then switch back on.

• There’s a picture, but no sound!

Try switching the

DV Input

setting (see

DV Input

on

page 140) between

Stereo 1

and

Stereo 2

.

1

About DV

Using DV, also known as i.LINK or IEEE 1394-1995, you
can connect a DV camcorder to this recorder using a DV
cable for input of audio, video, data and control signals.

“i.LINK” and the “i.LINK” logo are trademarks.

• This recorder is only compatible with DV-format

(DVC-SD) camcorders. Digital satellite receivers and
Digital VHS video recorders are not compatible.

• You cannot connect more than one DV camcorder at

a time to this recorder.

• You cannot control this recorder from external

equipment connected via the

DV IN

jack.

• It may not always be possible to control the

connected camcorder via the

DV IN

jack.

• DV camcorders can usually record audio as stereo

16-bit/48 kHz, or twin stereo tracks of 12-bit/32 kHz.
This recorder can only record one stereo audio track.
Set the

DV Input

setting as required (see

DV Input

on

page 140).

• Audio input to the

DV IN

jack should be 32 kHz or 48

kHz (not 44.1 kHz).

• Picture disturbance in the recording may occur if the

source component pauses playback or plays an
unrecorded section of tape, or if the power fails in the
source component, or the DV cable is disconnected.

• The

DV IN

jack is an input only. There is no output

functionality.

Note

1 If the audio subcode on the DV tape cannot be read correctly, the audio type will not switch automatically. You can switch the audio manually

from the

External Audio

setting (page 140).

DVRLX60D_WV_EN.book 103 ページ 2007年4月24日 火曜日 午後7時58分

Advertising
This manual is related to the following products: