Using the built-in a.tv and d.tv tuners, Recording 06 – Pioneer RCS-LX60D User Manual

Page 81

Advertising
background image

Recording

06

81

En

Using the built-in A.TV and D.TV tuners

Switching between A.TV and D.TV tuners

Press to switch between D.TV (digital) and

A.TV (analog).

Changing channels

There are a number of ways to select analog and digital

TV channels.

1

Note that you can’t change the TV channel

during playback, recording or during recording standby.

Smart Jog

Number buttons

For example, to select channel 4 (digital channel
D004), press

4

then

ENTER

; for channel 34 (digital

channel D034), press

3

,

4

,

ENTER

.

2

CH +/– buttons

on the front panel.

• For D.TV channels only, you can also use the Channel

List — see below.

Tip

• When changing terrestrial digital broadcast

channels, channels with a low signal strength may
result in a black screen being displayed.

• For other channels, it may take a short while for the

channel picture to appear, and/or for the channel
number to appear.

• In both of the above cases, some improvement may

be possible by adjusting the antenna.

Using the D.TV Channel List

When in D.TV mode, you can call up the on-screen Channel
List anytime by pressing

ENTER

. Use the

/

buttons to

select a channel, then press

ENTER

to switch to that channel.

3

Displaying a channel banner

A channel banner shows programme titles, start and end
times of the current programme and other channel
information. The information is updated every minute.

Press to display the channel banner for the

current channel.

• Use the

/

buttons to display the channel banner

for other channels. To switch to the displayed
banner’s channel, press

ENTER

.

• The channel banner displays the Subtitles (

) and

Teletext/MHEG (

) icon if they apply to the selected

channel.

4

• To see more detailed channel information, press

INFO

again.

5

Use the

/

buttons to display information about

previous and following programmes. Use the

/

buttons to see information about other channels.

• If there is still more information to be displayed,

More ...

is displayed; press the

BLUE

button to see

the extra information.

• To hide the channel banner, press

RETURN/EXIT

.

Note

1 • If you select a locked channel, you will need to enter your password to access it.

• While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for three minutes.

2 Analog channel presets are numbered 1 to 99; digital channel presets are numbered D001 to D999.

A.TV/D.TV

CHANNEL

CHANNEL

SETUP

F.S.SURR

ADVANCED

TEST TONE

SR+

/TUNE+

ENTER

/TUNE–

/ST–

/ST+

1

2

3

4

5

6

7

8

0

9

3 • If you select a locked channel, you will need to enter your password to access it.

• While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for three minutes.

4 Due to inaccurate information provided by the broadcaster, some icons may occasionally be present or absent in error.
5 Not all channels supply more detailed information.

D001
D002
D003

D004

************
************
******

************

D005

D006

****

******

INFO

Wed.30.Apr 12:46

Now

D001 ************

Next

********************
*************

12:00

12:30

11:30

12:00

-
-

Now

************************

More...

12:00

11:30 -

DVRLX60D_WV_EN.book 81 ページ 2007年4月24日 火曜日 午後7時58分

Advertising
This manual is related to the following products: