Paradyne 9788 - Manual (Page 110)

5. Configuring the FrameSaver DSL Router
5-6 December 2002 9700-A2-GB20-20
NAT Configuration Example
In this NAT example:
NAT is used for one-to-one mapping of addresses.
The Ethernet interface is in the private address space and the DSL interface is
in public address space. With NAT enabled, a single global PVC is used to
access the public network.
When using NAT, the DSL interface must be numbered because the Ethernet
interface is configured within the private address space.
The next hop router (default gateway) for the clients is the Ethernet IP address
of the router, 10.1.3.1.
There are four private IP addresses configured on the Ethernet side of the
router with NAT static mappings to four public IP addresses.
NAT Mapping Public IP Addresses Private IP Addresses
192.128.22.28 10.1.3.2
192.128.22.29 10.1.3.3
192.128.22.30 10.1.3.4
192.128.22.31 10.1.3.5
NAT Example
01-16948
10.1.3.1 Public
Network
Public IP
Addresses
Server
FrameSaver
xDSL
Router
10.1.1.1