Paradyne 9788 - Manual (Page 178)

7. Operation and Maintenance
7-42 December 2002 9700-A2-GB20-20
Clearing Performance Statistics
Performance statistics counters can be reset to the baseline when using a
directly-connected asynchronous terminal and your security Access Level is
Level-1. This feature is useful when troubleshooting problems.
Statistic counters are not actually cleared using this feature, since true statistic
counts are always maintained to verify SLAs and to be available to view from an
SNMP NMS. Statistics viewed via the menu-driven user interface may be different
from those viewed from the NMS, because statistics can be locally cleared.
Procedure
To clear all statistics:
Main Menu →Status→Performance Statistics →Clear All Statistics
Procedure
To clear specific sets of statistics:
To reset the SLV and DLCI performance statistic counters for the currently
displayed DLCI, use the ClrSLV&DLCIStats function key from one of the
following screens:
Main Menu
→Status→Performance Statistics→
Service Level Verification
Main Menu →Status→Performance Statistics →DLCI
To reset frame relay link performance statistics, use the ClrLinkStats
function key.
Main Menu
→Status→Performance Statistics→Frame Relay
To reset Ethernet performance statistics, use the ClrStats function key.
Main Menu →Status→Performance Statistics→Ethernet