Trap event log – Paradyne 9788 User Manual
Page 179
7. Operation and Maintenance
9700-A2-GB20-20
December 2002
7-43
Trap Event Log
The Trap Event Log displays all traps stored in the SNMP trap event log. The
following log example describes the alarm conditions that will generate an SNMP
trap for a physical interface, and for the frame relay LMIs and DLCIs. These alarm
conditions also generate Health and Status messages seen on the System and
Test Status screen.
Main Menu
→Status →Trap Event Log
Trap Event Log Screen Example
Up to 12 trap events can be displayed on a screen with the most current displayed
first. Page down (PgDn) to view less current trap events. When no trap events
have been logged, No Events in Log appears in the Event column.
ASCII trap strings used to describe trap events are provided in the tables
contained in
Standards Compliance for SNMP Traps
Traps, and RMON Alarm Defaults.
main/status/event_log 9783-C-SLV
Device Name: Node A 09/11/2002 23:32
TRAP EVENT LOG
Total Trap Events: 535
Time of Day Event
09/09/02 21:21:20 Change in Frames Discarded due to Inbound Resource Errors on
Sync Data Port S01P1 frame relay link “Port-1" exceeded
threshold of 1 by 105.
09/09/02 23:59:59 Change in Total LMI Errors on Network DSL frame relay link
“Net1-FR1" exceeded threshold of 1 by 59.
09/09/02 23:59:59 DLCI 101 of Sync Data Port S01P1 frame relay link “Port-1" up.
09/09/02 23:59:59 DLCI 101 of Sync Data Port S01P1 frame relay link “Port-1"
down.
09/10/02 00:41:02 Primary clock failed.
09/10/02 00:59:59 Sync Data Port S01P1 frame relay link “Port-1" LMI down.
09/10/02 01:00:02 Network DSL frame relay link “Net1-FR1" LMI down.
09/10/02 01:00:02 Network DSL down.
09/10/02 01:03:23 Unit reset.
--------------------------------------------------------------------------------
ESC for previous menu MainMenu Exit
Refresh PgUp PgDn