Paradyne 9788 - Manual (Page 242)

B. SNMP MIBs, Traps, and RMON Alarm Defaults
B-2 December 2002 9700-A2-GB20-20
MIB Support
The FrameSaver unit supports the SNMP Version 1, and has the capability of
being managed by any industry-standard SNMP manager and accessed by
external SNMP managers using the SNMP protocol.
The following MIBs are supported:
MIB II (RFC 1213 and RFC 1573)
Frame Relay DTEs MIB (RFC 2115)
RS-232-Like MIB (RFC 1659)
Frame Relay Service MIB (RFC 1604)
EtherLike MIB (RFC 2665)
RMON Version 1 MIB (RFC 1757)
RMON Version 2 MIB (RFC 2021)
Downloading MIBs and SNMP Traps
Paradyne standard and enterprise MIBs are available from the Paradyne World
Wide Web site at www.paradyne.com.
Procedure
To access Paradyne MIBs:
1. From the Paradyne World Wide Web site, select:
Support →Online Technical Support
2. Under Technical Information, select MIBs.
3. Select FrameSaver Frame Relay Devices.
4. Select the desired MIB.
The download procedure may vary depending upon your browser or NMS
application software. Refer to your browser or OpenLane NMS instructions for
additional download information.