Paradyne 9788 - Manual (Page 81)

4. Configuration Options
9700-A2-GB20-20 December 2002 4-41
Configuring Management PVCs
To define inband management links, select Management PVCs (see Table 4-19,
Management PVC Options ). First, configure the DLCI interface records at the
Management PVC location. See Configuring Circuit Records for the Network
Interface (9783, 9788) on page 4-24 or Configuring DLCI Records on page 4-32
for additional information.
Select New or Modify to add or change Management PVCs.
When you select New, the configuration option field is blank.
When you select Modify, the values displayed for all fields are based on the
PVC ID number that you specified.
These options do not apply when the Management PVC is designated as a
TS Management Link (see
Configuring Node IP Information on page 4-38 for
additional information).
For easy movement between screens, from the Management PVCs screen, select
the PVCConn function key to go directly to the PVC connection screen.
For quick removal of unused DLCIs, select the Delete function key, a Management
PVC ID, and respond Yes to the prompt: Remove otherwise unused
components associated with the deleted PVC?
If the Management PVC selected is defined as a TS Access Management Link, a
Default IP Destination, or a trap for Initial Route Destination, a prompt appears to
warn you: Are You Sure?
To view the Management PVCs screen, select Management PVCs from the
Management and Communication menu.
Main Menu
→Configuration→Management and Communication→
Management PVCs
A payload management circuit is identified by PM in the EDLCI field of the
Management PVCs Options screen. If a payload management management
circuit is deleted, the associated PVC remains standard, even if was a multiplexed
PVC (automatically converted to standard) when the management circuit was
created.
If an existing PVC with an associated payload managed management circuit is
deleted, then the payload management circuit is also deleted