Planet Technology ICA-210W - Manual (Page 82)

81
B. PING Your IP Address
The PING (Packet Internet Groper) command can determine
whether a specific IP address is accessible by sending a packet to
the specific address and waiting for a reply. It can also provide a
very useful tool to confirm if the IP address conflicts with the
camera over the network.
Follow the step-by-step procedure below to utilize the PING
command but first you must disconnect the camera from the
network.
Start a DOS window. Type ping x.x.x.x and press [Enter], where
x.x.x.x is the IP address of the camera.
The succeeding replies as illustrated below will provide useful
explanation to the cause of the problem with the camera’s IP
address.