Polycom RMX DOC2554A User Manual

Rmx™ 4000, Installation quick start guide for rmx 4000, Basic setup modifying the usb key settings

Advertising
background image

Installation Quick Start Guide for

RMX 4000

Basic Setup

Modifying the USB Key Settings

1

Insert the USB key provided with your system into the PC workstation and double-

click LanConfigUtility.exe to start the utility.

2

Modify the parameters in the utility’s dialog box using the information supplied by

your network administrator.

3

Click OK.

4

Remove it from the PC.

First-time Power-up and Connection to MCU

1

Insert the USB key containing the modified IP addresses in the USB port on the

RMX’s back panel.

2

Power the RMX ON.
The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s

memory and applied during the power-up sequence.
System power-up sequence may take up to five minutes.

During the first-time power-up the red ERR LED on the RMX’s front panel remains

ON until both the Management and IP Network Services have been defined.

3

Remove the USB key.

4

5

6

.

Before installing the RMX 4000 and performing the Basic Setup, please read the
General Safety Precautions described in the Polycom RMX 4000 Hardware Guide.
For a detailed description of Unpacking and Rack mounting instructions, and
connecting a DC system
, see the Polycom RMX 4000 Hardware Guide.

MPM+ Cards & LEDs

Fan Drawer

Power Supply Drawers

and Status LEDs

Control Unit

(CNTL 4000) &

LEDs

Optional CPU

(Future)

Fan &

Power
Status

LEDs

Fabric Switch

Module

(FSM 4000)

Logo Panel &

ESD Connector

LAN Connections to Port 2 on each RTM LAN

LAN Connections to Port 1 on RTM ISDN

Power Cables

Off/On
Switch

E1/T1 Connection to RTM ISDN

Shelf
Management
(Port 6 on
RTM IP)

Management
Network
(Port 2)

Signalling
Network
(Port 3)

Two people are required to lift the MCU out of the box and when installing it in a
rack.

LAN 4, LAN 5 and the Serial ports are only for debugging and not for customer
use.

Do not remove the protective plastic caps from LAN 1, LAN 4 and LAN 5 ports.

Enter the IP address of the RMX Control Unit and press Enter.

Enter POLYCOM.
Enter POLYCOM.

Click Login.

Click to connect to Polycom
web site and register the
RMX.
Click Product Registration
and follow the on screen
instructions to obtain the
Product Activation Key.

Enter or paste the Product
Activation Ke
y obtained.

Click OK.

RMX™ 4000

1

DOC2554A

Advertising
Table of contents